National Metric Week is Coming: Can You Help?

The logo for this year’s National Metric Week

Believe it or not, we actually have a National Metric Week in this country. It’s always the week in which October 10^th falls (As in 10/10). This year it’s the week of October 6-12. The annual recognition of the importance of the metric system in the United States is promoted by the National Council of Teachers of Mathematics.

From the National Council of Teachers of Mathematics

Part of its formal position on the subject of metric system adoption reads in part:

The National Council of Teachers of Mathematics supports efforts by the U.S. government to make a transition to the metric system (SI) as the nation’s primary measurement system and to reestablish the U.S. Metric Board to support and encourage the use of the metric system. However, the Council recognizes the leadership responsibility of schools to ensure that all students have experiences that enable them to measure in both the metric and the customary systems as well as to solve problems related to measurement in either system.

The second part of that statement wouldn’t be necessary if we had converted to the metric system during one of our several attempts in the past 200+ years. (And yes, there was more than the one in 1975.)

If the National Council of Teachers of Mathematics think it’s important for our children to covert to the metric system (how I read the above statement) then it must be pretty important because these are the folks who teach our children math!

As if that wasn’t enough, I located the following in of the 2013 version of the National Education Association Handbook under its “Resolutions” section:

B-57. Metric System
The National Education Association believes in the adoption of the International System of Units (SI metric system). The Association advocates that the SI system be taught at all educational levels. Page 238.

And here’s what the National Science Teachers Association has to say to say on the subject (in part):

The efficiency and effectiveness of the metric system has long been evident to scientists, engineers, and educators. Because the metric system is used in all industrial nations except the United States, it is the position of the National Science Teachers Association that the International System of Units (SI) and its language be incorporated as an integral part of the education of children at all levels of their schooling.

Metric system conversion is a Science, Technology, Engineering and Mathematics (STEM) issue

As I’ve pondered our metric system history issues for more than a year, I’ve come to the conclusion that conversion to the metric system is fundamentally an education/STEM issue. For those of you not familiar with the STEM acronym STEM, it stands for Science, Technology, Engineering and Mathematics.

It’s a concept I’m very familiar with since I’ve been writing about regional STEM issues for the national laboratory where I work for many years.

Students well-grounded in STEM fields are critical to our country’s future

As if the above wasn’t enough, here’s what the U.S. Department of Education has to say about STEM education in our country:

The United States has become a global leader, in large part, through the genius and hard work of its scientists, engineers and innovators. Yet today, that position is threatened as comparatively few American students pursue expertise in the fields of science, technology, engineering and mathematics (STEM)—and by an inadequate pipeline of teachers skilled in those subjects. President Obama has set a priority of increasing the number of students and teachers who are proficient in these vital fields.

Further down on the same page it states:

Only 16 percent of American high school seniors are proficient in mathematics and interested in a STEM career.

Even among those who do go on to pursue a college major in the STEM fields, only about half choose to work in a related career. The United States is falling behind internationally, ranking 25th in mathematics and 17th in science among industrialized nations. In our competitive global economy, this situation is unacceptable.

STEM job projections from the Department of Education

This is a pitiful situation as far as I’m concerned.

Plus, STEM Careers Pay Well

The U.S. Census reports the “Per capita money income in the past 12 months (2011 dollars” is $27,915 in our nation.

According to the Bureau of Labor Statistics’ Occupational Outlook Handbook, here are the pay ranges for some STEM careers and many of them only include those for people with bachelors or masters degrees.

Life, Physical, and Social Science Occupations                      $32,760 to $107,420
Architecture and Engineering Occupations                              $37,900 to $114,080
Computer and Information Technology Occupations               $46,260 to $100,660
Math Occupations                                                                     $70,960 to $99,380
Physicians and Surgeons                                                         $189,402 to $407,292

The bottom line: Resources spent learning U.S. customary units in our schools is a waste of time and our children need to be well versed in the metric system to get high-paying careers in science and medicine.

I urge you to take advantage of national metric week this year to acquaint yourself with the metric system (if you’re not already familiar with it) and set a good example for those around you. Measure using those “other” marks on your rulers for a change and take a look at the milliliter side of your clear class measuring vessels the next time to pour in your ounces and cups.

It’s really not that difficult and, in fact, no country that has converted to the metric system has wanted to go back to its old way of doing things…something to think about.

For additional Metric Week resources, visit the U.S. Metric Association’s pages and the National Institute of Standards and Technology.

Thanks,
Linda

U.S. Metric Adoption and Common Core Education Standards

One thing I learned soon after starting this project is that our country is less the UNITED States of America than it is the United STATES of America. Having rallied against the British and its centralized government more than 200 years ago, our founding fathers made sure our Constitution gave limited powers to the federal government and put considerable control into the hands of state government. This includes our education standards.

While one might think that the Department of Education helps ensure that our children receive at least some basic level of education throughout our nation, such is not the case. In fact, the Department of Education:

1. Establishes policies related to federal education funding, administers distribution of funds and monitors their use.
2. Collects data and oversees research on America’s schools.
3. Identifies major issues in education and focuses national attention on them.
4. Enforces federal laws prohibiting discrimination in programs that receive federal funds.
   (http://www2.ed.gov/about/what-we-do.html)

You’ll notice that setting standards for what our children learn in schools is not within its scope—it’s up to the individual states to decide what children learn in what ways and even what constitutes a passing grade. (I don’t mean to imply here that the states are out to shortchange their children but they could if they so desired.)

While each state is able to set its own education standards, there has been progress toward the implementation of common, basic standards to finally provide some consistency in what’s covered within school classrooms across the country. The organizations behind this effort are the National Governors Association and the Council of Chief State School Officers.

The Common Core State Standards Initiative is a state-led effort that established a single set of clear educational standards for kindergarten through 12th grade in English language arts and mathematics that states voluntarily adopt. The standards are designed to ensure that students graduating from high school are prepared to enter credit bearing entry courses in two or four year college programs or enter the workforce.

http://www.corestandards.org/

According to the website: “Forty-five states, the District of Columbia, four territories, and the Department of Defense Education Activity have adopted the Common Core State Standards.” Those that have “not yet adopted” (the site’s wording) the standards are Alaska, Texas, Minnesota, Virginia, Nebraska and Puerto Rico. Work is still taking place for the standards and a visit to the Council of Chief State School Officers website shows that the publication Common Core State Standards: Implementation Tools and Resources is dated as recently as May 2013.

I’m happy to say that metric system is included in these standards.

Here’s what I found on the Common Core site for grades 2, 3, 4 and 5 under the sections called “measurement and data”:

Grade 2: “Measure the length of an object by selecting and using appropriate tools such as rulers, yardsticks, meter sticks, and measuring tapes and Estimate lengths using units of inches, feet, centimeters, and meters.”

Grade 3: “Measure and estimate liquid volumes and masses of objects using standard units of grams (g), kilograms (kg), and liters (l).”

Grade 4: “Know relative sizes of measurement units within one system of units including km, m, cm; kg, g; lb, oz.; l, ml; hr, min, sec.”

Grade 5: “Convert among different-sized standard measurement units within a given measurement system (e.g., convert 5 cm to 0.05 m), and use these conversions in solving multi-step, real world problems.”

From grade 6 and beyond, the “measurement and data” subheading no longer appears and other math concepts (such as probability) are listed.

So, at least the standards do include the metric system although it appears to be taught somewhat side by side with our U.S. customary units in at least grades 2 and 4. I suppose I could try to write something into the fact that for grade 3 the language says “standard units of grams, etc.” without mentioning U.S. customary units but I don’t think that buys much of anything. On the other hand, I could write into the fact that for grade 4 the wording “one system of units” could also mean that it could be interpreted to mean either U.S. customary or metric units could be used.

I’m writing about this subject for two reasons:

1. To raise awareness of the attempts to get some consistency within our country so we can best prepare our children for their (and our) future so that you can help support these standards—including when it comes time to press for elimination of U.S. customary units in favor of the metric system within the Core Standards, and

2) To make sure you know that while many powers were delegated to state control, Congress does have within its scope the ability to mandate our weights and measures. It states in the Constitution in Article 1, Section 8 that it is within the power of Congress:

“To coin Money, regulate the Value thereof, and of foreign Coin, and fix the Standard of Weights and Measures.

The bottom line: I hope there will come a time in the future when this information becomes important.

Linda

P.S. I would like to thank any of my readers who helped back the Kickstarter campaign for the documentary on the kilogram. Amy met her goal and, as a result, has had the funds released to her to carry on her project. I wish her much luck and success with her efforts.