The ‘Argument of Twelves’ and the Metric System

The fact that we have 12 inches in a foot isn’t a good reason to reject the metric system. Image from arielrobin on Pixabay.

(Sorry for the long lag between posts. I had some things going on in my life that required my full attention. Things are pretty much back on track. Thanks for your patience.)

Awhile back I was fulfilling my role as a scientist ambassador at the Bradbury Science Museum here in Los Alamos, NM. (This mostly consists of setting up various measurement activities and chatting with visitors about the advantages of the metric system for a couple of hours on the occasional Saturday.)

One day I realized that a man was starting to pace back and forth in front of me. Even though I wasn’t yet done prepping and I sensed this gentleman was about to go on the attack, I went ahead and said, “People are dying in this country because we don’t use the metric system in this country.”

“I don’t believe you,” he replied.

Even the Centers for Disease Control recommends strict use of metric units for liquids. (Pills are measured in grams, or a fraction thereof, already.)

I then handed him the 2016 Top Ten Patient Safety Concerns for Healthcare Organizations report put out by ECRI [Emergency Care Research Institute]. Number seven on the list: “Medication Errors Related to Pounds and Kilograms.” It advocates for only using metric system units (i.e. kilograms for weight) to reduce dosing errors since most medications use weight to determine the correct dose. It’s reason is simple: There are about two pounds in a kilogram. Doctors and nurses are schooled in the metric system but have to bounce back and forth between metric and U.S. customary units to communicate with their American patients. If they mix up the two, they might give the patients half the dose they need (potentially rendering it ineffective) or twice the amount (read overdose).

Using metric system units for medicine has also been recommended by multiple health organizations including the Centers for Disease Control. (See the above image)

The gentleman reviewed the report and since—I assume—he could no longer argue on that particular point, he launched into what I’ve now dubbed “The argument of twelves.”

The Argument of Twelves

The argument goes something like this: If you are working with a group/set of 12s, then your factors are 1, 2, 3, 4, 6, and 12; but if you are working in the metric system, your factors are only 1, 2, 5, and 10.

I consider this to be a specious argument since (and please, but nicely correct me if I’m wrong) we don’t really measure a lot of things by twelves. Sure, a foot has twelve inches and there are twelve months in a year. (Apparently eggs are sold by the dozen—according to the New York Times—because eggs were a penny each and there are 12 pennies in a shilling. Selling eggs by the dozen meant, as a vendor, you didn’t have to make change.) However, there isn’t much else I can think of that comes in twelves except a gross of 144 items (which is 12 multiplied by 12). You can’t really cite time because military/Zulu time uses a 24-hour clock.

If we actually had 12 ounces in a cup and 12 cups to a gallon and 12 ounces in a pound and 12 yards to a mile, then I would understand that counter argument. (In reality, there are 8 ounces in a cup, 16 cups and 128 ounces in gallon, 16 ounces in a pound, and 1,760 yards in a mile…plus 36 inches or 3 feet in a yard and so on.)

But, when it comes to everyday measurement, we really only divide up inches, months, and eggs into twelves. I don’t think that’s enough reason to reject using the metric system.

However, I’ve found after seven years on this project (the anniversary of which was the day before yesterday), if people are threatened by the idea of changing to the metric system—for any number of reasons—they will latch onto whatever immediately comes to mind to reject it.

Around the time that the man was winding down his argument of twelves, some other—more open-minded people—approached me and I turned my attention to them.

I’ve said many times that, when it comes to this issue, there are probably 10-20 percent of people who already love the metric system and there’s about another 10-20 percent who are completely opposed to it.

It’s my plan to focus my attention on the 60 to 80 percent who don’t realize we have a problem in this country and are open to learning about it. Maybe action will eventually occur. That’s my hope. If you want to become more involved, let me know at milebehind@gmail.com.

In a closing note: I realize that some people ascribe a historical and religious meaning to the number 12, but we don’t have to limit the number of members on a jury or the number of apostles due to the metric system so let’s not shoehorn that number into our measurement system unnecessarily.

Plan for another post in September.

Thanks for getting this far,

Linda

Measures and mistakes due to our lack of the metric system

The scene when the Spinal Tap’s manager discovers the prop is MUCH smaller than he expected.

In a scene in Rob Reiner’s mockumentary, This Is Spinal Tap, the rock group’s manager (played by Tony Hendra) goes to pick up a piece of scenery that is meant to evoke Stonehenge in connections with one of the group’s songs. He indicates that he’s quite pleased with the model with which he’s been presented with until he finds out that it is the finished piece and not a model. He expected something 18 feet high, not 18 inches high.

The designer (played by Anjelica Huston) seeks to defend herself and pulls out the napkin she’d been given to work from to show that the specifications indicated 18″ by 18″. She’d done exactly as instructed.

A zoom in on the napkin held in the character’s hand reveals the specifications she was given was, in fact, not 18 feet but 18 inches.

Within our measurement system, the difference between (“) and (‘)* is huge. In fact, the difference is 279.4 mm or 11 inches!

“Well,” defenders of our current measures might say, “that was done for comic effect and bears no relationship to the real world.”

I beg to differ by way of an example supplied to me by a coworker.

Her husband needed a metal bar fabricated and specified on the order “3/4″ x 3/4” x 1/2′ Long.” However, instead of getting a bar that was three-quarters of an inch wide and three-quarters of an inch thick and six inches long, he instead received a small block since the (1/2’), or a half foot, direction was read instead as part of an inch rather than part of a foot.

The instructions as provided to the fabricators.

Instead of a six-inch-long bar, he ended up with a block slightly smaller than an inch in all dimensions.

As if that isn’t confusing enough, the (“) and (‘) symbols can denote both lengths and durations. Thus, 5’ 4” could mean either five feet and four inches or five minutes and four seconds if there were no context indicating which measure was intended.

So, along with the many stumbling blocks of education and medicine, and other errors related to commerce, this particular vendor had to record the original order as a loss and make and send an item that actually conformed to what the customer had originally specified.

Such errors would be greatly reduced if orders were written in “mm” for the measures rather than in the easily mistaken (“) and (‘) units.

Thus, the order could have been written: “19.05 mm x 19.05 mm x 152.4 mm.”

A lot less ambiguous.

I wasn’t able to find any information on how frequently such errors are made, but if I only had to look to the office next to mine to find an example, can they be very far away from any of us in this country?

U.S. rulers often contain a confusing mix of whole, half, quarter, eighth and sixteenth units. Metric system rulers usually just mark on the whole (10) and half (5) counts.

In conducting research for this piece, I also came across information related to “how to read a ruler/tape measure.” One source went into detail about how to distinguish between the half- and quarter-inch marks on such tools. In contrast, metric system-based rules only have differing marks to help count the “fives” and “tens.”

As I continue to look, the more examples I find of how we’re making our lives more difficult since we don’t use the metric system exclusively in this country.

Have an example of confusion/problems you’ve encountered due to our lack of metric system adoption you’d like to share? Feel free to comment on this page or send an email to me at milebehind@gmail.com.

Stay tuned. Right now I’m researching our very early history with the metric system in this country. Luckily, prior to the last metric system push in the mid-1970s, our government put out a 200+ page document that goes into just such history. I’m now rereading it within the context of the book I’m writing.

Thanks for getting all the way down here.

Linda

* Note: Marks for feet and inches should always be indicated by straight lines, rather than by using quotation marks, which are usually curved. Did I have to look up how to make the straight lines to indicate feet and inches to write this article? Yes, yes I did.